Feed aggregator

The Milk-V Mars is a new single board computer built on the StarFive JH7110 RISC-V processor. The device is featured in a Raspberry Pi SBC form-factor and it supports up to 4K resolution. According to the announcement page, the Milk-V Mars is based on the StarFive JH7110 quad-core processor also seen in the Star64 single […]

The Debix Model B is a single board computer integrating the NXP i.MX8M Plus processor with 2.3 TOPs NPU and with extended operating temperature range. The new embedded device comes in a Raspberry Pi form-factor and offers similar peripherals.   The company states that the only difference between the Debix Model A launched last year and […]

Estone Technology just launched an embedded board based on the NXP i.MX8M Plus processor along with a 2.3 TOPS Neural Processing Unit. Some of the features found include a RJ45 port and an onboard voice DSP.  The EMB-2239 is another single board computer integrating this quad-core NXP processor similarly to the eDM-SBC-iMX8MP from DATA MODUL […]

CrowdSupply featured today the new AntSDR E200 software-defined radio (SDR) educational platform optimized for applications involving Wi-Fi, GSM, LTE and other wireless solutions. The product page shows that there are two AntSDR E200 variants available. However, both variants integrate a Xilinx FPGA from the Zynq-7000 family. XC7Z020-CLG400 — 85k Logic Cells, 53K LUTs, 220 DSP […]

This month, EDATEC launched an industrial embedded computer built around the Raspberry Pi Compute Module 4. The CM4 Industrial comes with two RJ45 ports, a 4G/LTE module, certified 2.4/5.8G dual-band Wi-Fi, Bluetooth and support for external antennas. This is another computer system designed for industrial applications based on the Raspberry Pi Computer Module 4. The […]

Sipeed launched yesterday the Tang Nano 20K development board powered by a GowinSemi FPGA from the GW2A series. This compact embedded platform offers the same amount of logic units as the Tang Primer 20K launched last year. The latest datasheet indicates that the Tang Nano 20K features the GW2AR-18 and an onboard Buffalo Labs BL616 […]

The EmETX-i92U0 is an industrial Computer-on-Module designed with the 11th Generation Intel Core processors. This customizable board delivers Ultra HD display, codec support, up to 12x USB ports and wide expansion ports. The EmETX-i92U0 is featured in a COM express form-factor and it’s built on Intel’s 10nm SuperFin process technology. The product page shows that […]

Orange Pi recently launched a single board computer equipped with an octa-core Rockchip RK35588 SoC along with an up to 6 TOPs NPU. The new SBC can handle up to four displays, two 2.5GbE LAN  interfaces and many other expansion ports. Unlike the Orange Pi 5 (Rockchip RK3588S), this new SBC implements the 64-bit RK35588 […]

SolidRun’s new industrial System-on-Module features the AM64x Sitara family of processors from Texas Instruments. The embedded products provide support for multi-protocol industrial ethernet with TSN and they are compatible with new the HummingBoard-T carrier boards also from SolidRun. The product page shows that there are two Sitara SOM variants available for now: the Sitara AM6442R […]

The eDM-SBC-iMX8MP is a Single Board Computer that runs Linux on the NXP i.MX8M Plus quad-processor with an integrated Neural Processing Unit and HiFi4 DSP.  The datasheet indicates that this DATA MODUL SBC can be ordered with two variants of the NXP i.MX8M Plus processor. The main differences noticed is that one of the processor […]

The Jetsys-5330 is a rugged small computer system built around the NVIDIA Jetson Orin AGX Orin System-on-Module. The new device from Elma Electronic features multiple expansion ports and can handle up to 6x GMSL2/GMSL1 cameras.  The JetSys-5330 AI performance varies depending on the Jetson AGX Orin module selected. For example, the Jetson AGX Orin 32GB […]

The Coral Dev Board Micro is a small dual-core microcontroller device with a 4 TOPS ML accelerator and built-in camera. These embedded boards, the compatible PoE module and Wi-Fi/BT5.0 module are already available from a couple of global distributors. The product page specifies that the Dev Board Micro features a high-performing, low-power microcontroller that belongs […]

ICP Germany just launched a high-performance Single Board Computer based on Intel Celeron processors. The HYPER-EHL board offers numerous serial ports and it can support up to two simultaneous displays via HDMI and iDPM. The datasheet describes that the HYPER-EHL comes with 4GB LPDDR4x memory by default, but it can be configured with up to […]

iWave Systems recently announced the iW-RainboW-G54S STM32MP13x LGA System on Module aimed at low-power embedded and consumer applications. The company also unveiled a compatible SBC to provide access to extensive peripherals. This iWave Systems OSM can be configured with any of the following three STM32 microcontrollers with Armv7 Architecture: STM32MP131 – 32-bit Single Arm Cortex-A7 […]

MYIR launched this month an industrial development platform based on the Xilinx XC7Z010/20 System-on-Chip. The base board supports up to 3x Gigabit ports, CAN interfaces and other flexible peripherals. The MYD-Y7Z010/20-V2 CPU module has a 10-layer PCB design and it can accommodate the Zynq-7010 or the Zynq-7020 SoC with the following specs: Zynq-7010/7020 SoC – […]

The Hadron Carrier is an ultra small, rugged carrier board compatible with multiple NVIDIA Jetson modules. This new product from Connect Tech comes with one GbE connector, camera support and various expansion headers. The top side of the board features a SODIMM 260-pin connector to accommodate NVIDIA modules such as the Jetson Orin NX, Orin […]

The LPC860-MAX by NXP is an evaluation board targeting applications such as motor control, wearables and other consumer products. The eval board is equipped with a 32-bit ultra-low power Arm Cortex-M0+ and up to 54x GPIOs. This specific evaluation board integrates the LPC86x family of microcontrollers. Refer to the table below to see other MCUs […]

ADLINK presented today a fanless embedded media player built around the 11th Gen Intel Core processors. The EMP-510 can handle up to four simultaneous displays, two 2.5 Gigabit ethernet interfaces and other serial ports. The product announcement reveals that the EMP-510 Series can be ordered with the following Intel processors with 10nm process. i5-1145G7E — […]

DFRobot launched today an ESP32-based development board that can be used in computer vision and signal processing applications. The compact module also includes Li-on battery charging features. DFRobot is offering the FireBeetle 2 with the ESP32-S3-WROOM-1-N16R8 or ESP32-S3-WROOM-1U-N16R8 module. The latter ESP32 module comes with an antenna connector. ESP32-S3 (N16R8) — Dual-core Xtensa LX7 (up […]

ICOP launched last month a single board computer based on the i.MX8M mini multicore processor designed for machine vision, industrial systems, embedded systems and smart retail applications. The datasheet indicates that the NX8MM-35 integrates the following NXP multicore processor along with a GCNanoUltra for 3D acceleration/GC320 for 2D acceleration and support for OpenGL ES 2.0. […]